Saturday, January 24, 2009

Fibers for bedtime

So, I’ve been repairing kites for a long time now. When I first started it was like learning to sew all over again. I'd then been sewing for over 10 years and thought I was already pretty damn good at it. Many of the challenges it presented were expected. Stiff fabric in tight places and sewing panels long after the kite is complete that were added near the beginning of the manufacturing sequence. All these things were difficult to get not only right but also looking sharp. One thing in particular though has been a real plateau to get to for me. Sometimes there is a situation that happens where a seam's thread will fail all the way down. Like a zipper had been opened. The kitesurfing kites have inflatable struts that run down the sail and sometimes they come away from the sail in this way. Okay so back to sewing 201. On long seams you have to manage the creep of the lower layer. Keep it from bunching up. Well here is the thing. You are not working on your own kite. You are working on a kite built in China on a seam that was previously already sewn. Your're trying to emulate the way it was sewn to begin with, matching the other struts and especially the strut you are sewing on. If you sew it perfectly, it isn't perfect. Keeping the layers from moving isn’t the objective anymore. You have to allow the lower layer to creep the exact amount that the Chinese operator and their machine did. Otherwise you will end up with a cm or more of empty stitch holes on the bottom.

What is really interesting for me about this is the mental state it puts me into. I like to imagine that I have been at my machine all day long and didn't get coffee and I am not making any money and I will go home to 12 people in my 400 square foot apartment. I like to think of the floor director looking over my shoulder and not saying anything but writing something down on a clipboard and moving along to the next machine. Then I think of the person I’m repairing the kite for. How he or she will be thinking about how much their next kite will cost, the fact that they are so expensive. Like nearly all of us in this disposable world, never putting the two simple facts together that they are paying me $80.00 and shipping both ways to sew a simple 6 foot repair, meanwhile telling me how wonderfully reasonable my prices are - which is certainly true. However, the entire kite, bag, and 4-color printing in the included instructions, was priced at retail of say $949.99 and was shipped across an ocean of water in a container on a ship. How does this happen? The kite cost the retail storeowner a little over half that. That means the distributor bought it from the factory for close to 1/4 of the retail cost. So the factory gets $200 for this kite. Out of that comes material and overhead. Where do the wages for the workers fit in? It’s just amazing. 

I see in these kites a precision of manufacturing that sometimes makes me doubt my own abilities. I find little Chinese characters hidden under the seams to indicate where each of the hundred and fifty or so panels and pieces go. I see an eyelash stuck under the adhesive of a reinforcement strip. The people who made this kite probably know little of how it is used and certainly will never be able to afford one. What do they dream? Could they ever imagine that I would be sewing on seams that they made? Do they think of the kite in the sky? I can only sew and wonder.

stitching and thinking
tim

3 comments:

  1. I don't know what to say, but appreciate and echo your thoughts.

    ReplyDelete
  2. Well, thank you. Since I've been sewing I look at things in stores and marvel at their value vs. price. It's a crazy world out there.

    ReplyDelete
  3. I've always loved the bit about finding the chinese characters and the eyelash.

    ReplyDelete